The installation / Palm Desert, CA
How We Install Belgard Pavers
The finished pattern gets noticed. The work beneath it makes it last.
From the first grade check to the final joint, we build Belgard paver surfaces around how Coachella Valley ground, heat and sudden rain actually behave.

01 / Built from the ground up
Every layer has a job, from the soil below to the sand between the pavers.
Survey & layout
We walk the site, check existing grades and access, and mark the driveway, patio or walkway footprint. The layout accounts for transitions at doors, garages and planting beds before excavation starts.
Full excavation
We remove the existing surface and excavate for the complete paver assembly—not just the thickness of the visible stone. Depth and preparation are planned around the site and whether the surface will carry foot or vehicle traffic.
Compacted sub-base
Crushed aggregate is placed and compacted in lifts to form a firm, even foundation. This is the stage that helps prevent isolated settling and keeps the finished surface aligned.
Drainage & permeable options
We set the grade to move water away from buildings and avoid low spots during desert downpours. Where a permeable paver system suits the property, its open-graded base and joints are planned as a complete drainage assembly.
Bedding & laying
We screed the bedding sand, then hand-lay the Belgard pavers to the agreed pattern. Lines, joints, cuts and changes in direction are checked as the surface takes shape.
Concrete edge restraint
Concrete restraint secures the perimeter so the field of pavers cannot gradually spread. We finish edges around curves, planting areas and adjoining surfaces with the same care as the center of the installation.
Joint sand & sealing
Joint sand fills the spaces between pavers and helps lock the surface together. We clean the installation and discuss sealing based on the chosen paver, exposure and how the space will be used.
The base is the project.
A Palm Desert driveway faces vehicle loads and intense sun. A patio may meet a pool deck, irrigation or a change in grade. We plan the foundation and water path for that particular space rather than treating every Belgard installation as the same stack of materials.
The result should look considered from above—and stay level beneath your feet.

A driveway and a garden path should not be built to the same brief.

For driveways, we focus on the load-bearing base, perimeter restraint and clean transitions to the street and garage. For patios and walkways, we pay close attention to comfortable steps, planting edges and how runoff moves through the yard.
Poolside surfaces bring their own questions: wet-foot traction, surface color, coping transitions and drainage away from the pool. We work through those choices at the site survey, before a pattern is laid.
Considering a surface that lets water pass through? Explore our permeable paver systems , or see how we approach custom driveways and stone patios .
Tell us what you want to build. We’ll look at what it needs underneath.
Pavers Pavers Pavers installs outdoor surfaces in Palm Desert and across the Coachella Valley, including Rancho Mirage, Indian Wells, La Quinta and Palm Springs. Call to discuss your property and request an estimate.
